增加：农商云nsy-g68-plus；农商云nsy-g16-plus；彼度云bdy-g18-pro等等设备

[liubei1998]

详细叙述

o大你好，有几个新的RK35xx设备，已经火了很久了，可是还没有对其支持；找到了稍微小众的编译固件，地址如下zhoufuli/immortalwrt-rk356x里面有好几个RK35xx的dts，大佬项目中还没有添加，望加入，以便造福下游，谢谢。贴上自己提取出来的dts的zip包

rockchip.zip

具体型号

农商云nsy-g68-plus；农商云nsy-g16-plus；彼度云bdy-g18-pro；等等
配置都差不多：rk3568 4lan+1wan（都是千兆） emmc + m2.接口+usb3.0 带wifi

[ophub]

这是dts： https://github.com/zhoufuli/immortalwrt-rk356x/tree/main/target/linux/rockchip/files/arch/arm64/boot/dts/rockchip

这是u-boot： https://github.com/zhoufuli/immortalwrt-rk356x/tree/main/package/boot/uboot-rockchip/src/arch/arm/dts

齐活了，你说咱们是白天干还是等晚上了再来干。也别一锅都端了，好歹给主家留点，你说咱顺走哪些比较肥的？你有这些设备的介绍文章没，分别是什么配置？emmc多大，内存多大，网口几个是千兆还是百兆？

[liubei1998]

我买了农商云NSY-G68-Plus，介绍如下：https://www.right.com.cn/FORUM/thread-8398388-1-1.html
其他的设备我没买，但是差不多，wifi芯片略有差异吧，还有就是带不带usb的区别，emmc这个不一定，自己焊接多大的就是多大，例如8G、64G、128G等等。我的建议是，优先增加几款支持m2固态硬盘的机器，同时也是咸鱼上常看到、这种可玩性更高。
即：农商云nsy-g68-plus；农商云nsy-g16-plus；彼度云bdy-g18-pro

圈起来的设备，o大项目中已支持，第一个不认识是啥。我觉得都可以加进来吧，一来方便购买各个机型的玩家折腾，二来丰富本项目库。标明来处和感谢就好了

[robinZhao]

这个支持了没

[robinZhao]

这是dts： https://github.com/zhoufuli/immortalwrt-rk356x/tree/main/target/linux/rockchip/files/arch/arm64/boot/dts/rockchip

这是u-boot： https://github.com/zhoufuli/immortalwrt-rk356x/tree/main/package/boot/uboot-rockchip/src/arch/arm/dts

齐活了，你说咱们是白天干还是等晚上了再来干。也别一锅都端了，好歹给主家留点，你说咱顺走哪些比较肥的？你有这些设备的介绍文章没，分别是什么配置？emmc多大，内存多大，网口几个是千兆还是百兆？

NSY-G68-Plus

5个千兆口
m2插槽
瑞芯微RK3568核心板
内存4G
原本是spi-nor，后期被改成了emmc

交换机rtl8367s的驱动不好搞

[ophub]

这3个内核dts编译时有一堆警告：

arch/arm64/boot/dts/rockchip/rk3568-nsy-g16-plus.dts:989.3-13: Warning (reg_format): /spi@fe300000/flash@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm64/boot/dts/rockchip/rk3568-nsy-g16-plus.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/rockchip/rk3568-nsy-g16-plus.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/rockchip/rk3568-nsy-g16-plus.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/rockchip/rk356x.dtsi:1088.20-1097.4: Warning (spi_bus_bridge): /spi@fe300000: incorrect #address-cells for SPI bus
  also defined at arch/arm64/boot/dts/rockchip/rk3568-nsy-g16-plus.dts:984.6-994.3
arch/arm64/boot/dts/rockchip/rk356x.dtsi:1088.20-1097.4: Warning (spi_bus_bridge): /spi@fe300000: incorrect #size-cells for SPI bus
  also defined at arch/arm64/boot/dts/rockchip/rk3568-nsy-g16-plus.dts:984.6-994.3
arch/arm64/boot/dts/rockchip/rk3568-nsy-g16-plus.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/rockchip/rk3568-nsy-g16-plus.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge'
arch/arm64/boot/dts/rockchip/rk3568-nsy-g16-plus.dts:987.10-993.4: Warning (avoid_default_addr_size): /spi@fe300000/flash@0: Relying on default #address-cells value
arch/arm64/boot/dts/rockchip/rk3568-nsy-g16-plus.dts:987.10-993.4: Warning (avoid_default_addr_size): /spi@fe300000/flash@0: Relying on default #size-cells value
arch/arm64/boot/dts/rockchip/rk3568-nsy-g68-plus.dts:989.3-13: Warning (reg_format): /spi@fe300000/flash@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm64/boot/dts/rockchip/rk3568-nsy-g68-plus.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/rockchip/rk3568-nsy-g68-plus.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/rockchip/rk3568-nsy-g68-plus.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/rockchip/rk356x.dtsi:1088.20-1097.4: Warning (spi_bus_bridge): /spi@fe300000: incorrect #address-cells for SPI bus
  also defined at arch/arm64/boot/dts/rockchip/rk3568-nsy-g68-plus.dts:984.6-994.3
arch/arm64/boot/dts/rockchip/rk356x.dtsi:1088.20-1097.4: Warning (spi_bus_bridge): /spi@fe300000: incorrect #size-cells for SPI bus
  also defined at arch/arm64/boot/dts/rockchip/rk3568-nsy-g68-plus.dts:984.6-994.3
arch/arm64/boot/dts/rockchip/rk3568-nsy-g68-plus.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/rockchip/rk3568-nsy-g68-plus.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge'
arch/arm64/boot/dts/rockchip/rk3568-nsy-g68-plus.dts:987.10-993.4: Warning (avoid_default_addr_size): /spi@fe300000/flash@0: Relying on default #address-cells value
arch/arm64/boot/dts/rockchip/rk3568-nsy-g68-plus.dts:987.10-993.4: Warning (avoid_default_addr_size): /spi@fe300000/flash@0: Relying on default #size-cells value
  DTC     arch/arm64/boot/dts/rockchip/rk3568-photonicat.dtb
arch/arm64/boot/dts/rockchip/rk3568-bdy-g18-pro.dts:989.3-13: Warning (reg_format): /spi@fe300000/flash@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm64/boot/dts/rockchip/rk3568-bdy-g18-pro.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/rockchip/rk3568-bdy-g18-pro.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/rockchip/rk3568-bdy-g18-pro.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/rockchip/rk356x.dtsi:1088.20-1097.4: Warning (spi_bus_bridge): /spi@fe300000: incorrect #address-cells for SPI bus
  also defined at arch/arm64/boot/dts/rockchip/rk3568-bdy-g18-pro.dts:984.6-994.3
arch/arm64/boot/dts/rockchip/rk356x.dtsi:1088.20-1097.4: Warning (spi_bus_bridge): /spi@fe300000: incorrect #size-cells for SPI bus
  also defined at arch/arm64/boot/dts/rockchip/rk3568-bdy-g18-pro.dts:984.6-994.3
arch/arm64/boot/dts/rockchip/rk3568-bdy-g18-pro.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/rockchip/rk3568-bdy-g18-pro.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge'
arch/arm64/boot/dts/rockchip/rk3568-bdy-g18-pro.dts:987.10-993.4: Warning (avoid_default_addr_size): /spi@fe300000/flash@0: Relying on default #address-cells value
arch/arm64/boot/dts/rockchip/rk3568-bdy-g18-pro.dts:987.10-993.4: Warning (avoid_default_addr_size): /spi@fe300000/flash@0: Relying on default #size-cells value

我修复了一下好了：codesnas/linux-6.6.y@f7db9bf

  DTC     arch/arm64/boot/dts/rockchip/rk3568-hlink-ht3.dtb
  DTC     arch/arm64/boot/dts/rockchip/rk3568-mrkaio-m68s.dtb
  DTC     arch/arm64/boot/dts/rockchip/rk3568-bdy-g18-pro.dtb
  DTC     arch/arm64/boot/dts/rockchip/rk3568-nsy-g16-plus.dtb
  DTC     arch/arm64/boot/dts/rockchip/rk3568-nsy-g68-plus.dtb
  DTC     arch/arm64/boot/dts/rockchip/rk3568-photonicat.dtb
  DTC     arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dtb

我看作者在3个u-boot源码里都有申明需要更换uboot版本,因为只有支持的pcie拆分的才能启动这个，不知道这个仓库放的u-boot是换了的吗？
https://github.com/zhoufuli/immortalwrt-rk356x/blob/75893810bd4d9155f7248b41ac90c7d8850d4699/package/boot/uboot-rockchip/src/arch/arm/dts/rk3568-nsy-g68-plus.dts#L670-L682

// 注意两条 pcie reset gpio 均与 NSY不同
// fe270000
// 这里需要更换uboot版本,因为只有支持的pcie拆分的才能启动这个
// 不然开启就挂死,更换版本:https://github.com/Kwiboo/u-boot-rockchip
// https://lists.denx.de/pipermail/u-boot/2023-August/525793.html
// 这个pcie,可能需要打补丁,使用radxa 版本
&pcie3x1 {
		vpcie3v3-supply = <&vcc3v3_pcie>;
		reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
		num-lanes = <0x1>; /*可能不生效,但是拆分需要打补丁,如果是吧,打补丁*/
		pinctrl-0 = <&pcie30x1_reset_h>;
		status = "okay";
};

你有农商云NSY-G68-Plus，我们就先编译这个的固件，你测试反馈下

[ophub]

农商云NSY-G68-Plus编译好了，你到releases里下载测试下。
这3个设备没有刷机障碍？买来原厂设备就能直接刷机？不需要破解或者使用解锁uboot？

https://github.com/ophub/amlogic-s9xxx-openwrt/releases

[robinZhao]

刷机
https://www.bilibili.com/video/BV1asAge7EJq/?spm_id_from=333.337.search-card.all.click&vd_source=897a0c63ab889d682042ee013108376b

[robinZhao]

https://github.com/[wigmox/Actions-OpenWrt](https://github.com/wigmox/Actions-OpenWrt)
rtl8763s的补丁

[ophub]

今天制作的测试版你试一下可以使用吧

[liubei1998]

o大，你项目发布的编译出来的3个nsy-g68-plus镜像（[OpenWrt_immortalwrt_master_save_2025.12]、[OpenWrt_lede_master_save_2025.12]、[OpenWrt_openwrt_main_save_2025.12]）我都试了，没有一个能够开机。我的ttl线坏了，没法提供启动日志。但是有个现象，能开机的固件（网友分享的+ImmortalWrt-NSY项目里编译的）文件大小都一样，都是292MB，o大你项目里面的解压出来是1.26GB。

[ophub]

大小是因为空站位，我默认生成的img就是1.25G，内容没多少。
你有可以正常使用的img没发给我下载地址。

amlogic-s9xxx-openwrt/remake

Lines 119 to 121 in e1f3d3f

	# Set OpenWrt firmware size (Unit: MiB, boot_mb >= 256, root_mb >= 512)
	boot_mb="256"
	root_mb="1024"

隔壁有个BDY-G18-Pro的armbian能使用，你们谁有能使用的armbian可以发给我下载地址。其实就2个文件，一个u-boot一个dts，只要找到能使用的这2个即可。上面我编译的openwrt就是使用的你分享的仓库的源码编译的，理论上他仓库的u-boot和dts应该可以使用啊。
#771 (comment)

[liubei1998]

https://www.right.com.cn/forum/thread-8403984-1-1.html
上面的帖子里面有，我再从帖子里复制一下

固件下载地址：
https://www.123pan.com/s/jfF9-oIwJ3.html 提取码: ts0A

https://www.123684.com/s/jfF9-oIwJ3? 提取码: ts0A

https://caiyun.139.com/m/i?1Q5BU9xWfkX10 提取码: tWPd

istoreos 22.03云编译仓库(只有istoreos固件，每天凌晨0点左右脚本会自动编译)
农商云istoreos 22.03固件云编译仓库

istoreos 24.10云编译仓库(只有istoreos固件，每天凌晨0点左右脚本会自动编译)
农商云istoreos 24.10固件云编译仓库

openwrt云编译仓库(只有openwrt固件，每天凌晨4点左右脚本会自动编译)
农商云openwrt固件云编译仓库

immortalwrt云编译仓库(只有immortalwrt固件，每天凌晨4点左右脚本会自动编译)
immortalwrt固件机型说明：“nsy-g68-plus” 使用的是闭源WiFi驱动，“nsy-g16-plus” 和 “bdy-g18-pro” 使用的是开源的WiFi驱动。
农商云immortalwrt固件云编译仓库

openwrt固件论坛

[liubei1998]

o大可以看看lede源码的一条已关闭的一条issues：coolsnowwolf/lede#13685

[ophub]

你有百度盘吗，这些里哪个是你测试的可以使用的。我翻了下历史帖子，仓库里之前就有个人发了帖子提供了一个仓库，我编译了也是不能用。你可以把你刷了可以使用的上传到你github仓库的releases里面

[liubei1998]

已上传https://github.com/liubei1998/ImmortalWrt-NSY/releases/tag/111
这里的每一个固件我都试了，可用：https://www.123865.com/s/Gt4Yjv-dEtph? 提取码:6666